Call Today: (786) 621-3065
Garage doors are great for additional security for your home since they not only provide security for your vehicles but also secure additional doors that lead into the house. Therefore, when a garage door has problems with closing, it can be stressful since it is a safety risk. For that reason, you want to address the problem immediately by fixing it yourself or contacting a professional to get the job done.
Your garage door might close all the way but hit the floor and then reverse. It might close halfway and then open all the way again. It can be pretty stressful to try and figure out the problem. You might be concerned that contacting a professional is not the best choice since you might be paying a steep price for a small repair job you could have done yourself. However, you may also be concerned that if you try the fix yourself, it might end up causing more damage, as a result causing you to pay more for a bigger repair job. There are a few things you can do to fix smaller problems, but if you are not familiar with garage doors and how to repair certain issues, it would be best for you to contact a licensed professional.
The first thing that might be causing the problem is the garage door opener. The automatic opener can be problematic and the way you can figure this out is by paying attention to the opener when you try to close the garage door. If the door seems to work perfectly until it does not close and you can hear sounds coming from the automatic garage door opener, the opener itself might be the problem. You may want to contact a professional to take a look to confirm the diagnosis since you do not want to touch the garage door hardware unless it is the problem.
The second thing that might be causing the problem could be the sensors that allow a garage door to function in a safe manner. Garage doors have sensors that detect if anything is in the way so that it can reverse the closing mechanism when the sensors are blocked by something in the way of the door. If nothing is in the way but the garage door closes halfway and then opens back up, the sensors may be the reason for it.
The first thing to do when you notice that your garage door is not closing all the way would be to take a look around the door and see that nothing is in the way. Make sure to look carefully and move everything out of the way, and confirm that nothing is in the way of the sensors.
Then, examine the sensors carefully. Something as simple as grime and dust can block the sensors, and even something as small as a cobweb in the way of the lens can prevent the sensor from working properly. If that is the case, give them a clean and try closing the garage door again. Look at the position of the sensors and align them if necessary, but only if you know how to do so. If you can see that they are misaligned, that may be the reason why the garage door does not close, and the best way to deal with this would be to get in touch with a technician so that they can fix the positioning of the sensors, examine the wiring, and then run through the sensor system to make sure it is working properly.
Limit settings can sometimes be the problem. Each garage door has settings that allow the door to move a certain distance in the tracks. Limit switch screws on the back of the door motor can be turned to change the limit settings but you want to be careful since the smallest of turns can increase the change drastically. Be careful with this procedure and try the smallest of changes to see if that is a problem to begin with.
Tracks can also be misaligned, making it difficult for the door to close. Inspect the tracks carefully, and if anything seems to be unbalanced, call professionals like those available at Garage Door Repair Brickell in Brickell, Florida. Repairs that involve the hardware of the garage door should be left to the professionals and we can guarantee that our technicians can do such repairs quickly and at the lowest cost.
If you have been unable to figure out the problem, try the wall station. Press the wall station and continue to do so until the door fully closes. If the garage door does close when you do this, the sensors are most likely the issue. Again, they might be dirty, misaligned, or may have shorted due to contact with water. You will want to consult a professional before deciding what to do next.
Any electrical component not functioning properly may make it difficult for you to close your garage door. If nothing seems to be working, you can use the manual release cord to close the garage door. Once you use the manual release cord, the opener will release the garage door and you will be able to manually close the door. This is ideal in situations where you cannot contact a professional immediately to determine the problem and it can be great as an emergency solution to close your garage door.
If it is hard to determine why your garage door is not closing, take a look at the seal of the door. Sometimes, when it is damaged or worn out, it can get in the way of the door. A cursory glance can confirm this problem and all you have to do for a solution in such a case is to have the seal replaced.
There are many reasons why a garage door may not close properly and it can be stressful. Make sure that you call a professional so that no further damage occurs and, ideally, call them as soon as a problem appears since you do not want to take risk and damage the garage door even further.
